Energy back bill: checking the twelve month rule and supplier evidence
How households in Great Britain can check an energy back bill, distinguish older unpaid debt and prepare a focused supplier complaint.
A revised energy bill can appear to turn several years of ordinary monthly payments into a large debt overnight. Before arguing about the total, identify what the supplier has actually changed. A new demand for previously unbilled consumption raises different questions from a reminder about an accurate bill that was already sent. The dates, readings and earlier statements matter more than the description “account adjustment”.
This guide concerns domestic gas and electricity accounts in Great Britain. It does not assume that the same rules cover Northern Ireland, bottled fuel, every heat network or an energy charge collected by a landlord. The practical aim is to prepare a focused complaint asking the supplier to identify the recoverable charges, correct the account and explain any remaining balance. It is general information, not a determination of liability in an individual case.
1. Identify the bill and the account you are challenging
Save the complete revised bill before the online account changes again. Record its issue date, account number, supply address, billing period and amount requested. Check whether it covers gas, electricity or both. If the supplier has combined an old closing balance with new charges, ask for the separate account histories rather than trying to reconstruct everything from one total.
Match the meter serial number on the bill to the meter at the property where you can safely do so. Photograph the display and identifying label without opening equipment or disturbing seals. A reading from a different meter, an unexplained replacement or a change between meter units can produce a dispute that needs investigation independently of the age of the charges.
Create a short document index. For example, label the original annual statement A, the revised bill B, the meter photograph C and your earlier complaint D. These labels are for making correspondence easier to follow. They do not require a particular legal format, and you should not delay reporting a serious problem while making an elaborate bundle.
2. Understand the twelve month protection and its limits
Ofgem explains that back billing protection can prevent recovery for energy used more than twelve months earlier where accurate charges were not previously provided, the relevant amount was not previously communicated through a statement, or the Direct Debit was set too low. The protection applies to households and microbusinesses, subject to its conditions.
It is not a general rule cancelling every debt once it becomes a year old. An accurate charge properly raised earlier and left unpaid may still be pursued. Equally, the mere existence of an old estimated statement does not answer whether the newly demanded amount was accurately billed before. Ask the supplier to identify the earlier bill and the particular charges on which it relies.
Ofgem also identifies unreasonable conduct as a possible exception, including obstructing accurate billing by blocking meter access. Do not omit an access dispute from your account of events. Explain what happened and preserve appointment messages, access arrangements and any reasons a visit could not proceed. The conclusion depends on evidence, not simply on one side describing the other as unreasonable.
3. Separate new charges from previously billed debt
Make a table with one row for each billing period. Include the period, original bill date, original charge, replacement charge and payments already credited. Add a final column explaining the question you want answered. A row might ask why a previously accepted reading was removed, or why a charge now appears against a period absent from the original statements.
Keep cancellations and replacements together. If the supplier cancels three earlier bills and issues a replacement, adding all four figures would exaggerate the account balance. Conversely, a refund entry might reverse a payment without removing the disputed charge. Follow the transaction sequence and ask which entries remain effective after the adjustment.
A bank payment record shows that money left your account, but it may not establish how the supplier allocated it. Compare payment dates with the supplier's ledger and query any missing credit. Where money went to an old account number after a move or supplier change, identify that fact clearly rather than assuming it has automatically reduced the new balance.
4. Ask for the calculation, not just a different total
Request the readings, their dates and whether each was actual, customer supplied, estimated or obtained from a smart meter. Ask for the unit rates, standing charges, tariff periods and treatment of VAT. You do not need to invent an alternative technical calculation if the supplier has not supplied the information necessary to check its own.
The supplier's explanation should connect the readings to the period and the period to the charge. If an estimate is replaced by a later actual reading, ask how usage was allocated across the intervening months. The question becomes especially important where the period spans the back billing boundary or a tariff change.
In its published explanation of charge recovery requirements, Ofgem addresses both standing charges and consumption, different payment methods, and continuing recovery of charges already properly billed. It also states that failure to supply a meter reading does not by itself remove the supplier's back billing obligations. Use these distinctions to ask a precise question; do not assume that every missing reading proves either side's case.
5. Build a factual chronology of contacts and readings
List when you moved in, opened the account, supplied readings, reported errors and received responses. Distinguish a message you sent from one the supplier acknowledged. If an app showed a submission confirmation, save it. If you only remember making a call, say so and give the approximate date without creating an exact time from memory.
Record meter visits and replacement events separately. A replacement photograph, engineer note or final reading can help explain a discontinuity. When an engineer attended but could not complete work, describe the stated reason. Avoid conclusions such as “the meter was definitely faulty” unless an appropriate investigation actually established that.
For smart meters, an in-home display and a supplier account may show different information. Preserve both, but label what each image represents. Ask which data the supplier used for billing. A screenshot of a daily estimate is not necessarily a substitute for the meter register or the account's underlying consumption record.
6. Write a complaint that requests identifiable corrections
Use the supplier's published complaints route and say explicitly that you are making a complaint about the revised bill. Set out the account, bill date and disputed periods first. Summarise the issue in a few sentences before referring to the attached chronology and calculations. A concise opening helps the reader distinguish the complaint from a routine request to change a Direct Debit.
Ask the supplier to explain whether each disputed charge was previously accurately billed; identify any earlier bill it relies on; apply the relevant back billing protection; and provide a corrected statement showing payments already made. If it alleges unreasonable conduct, ask for the facts and records supporting that conclusion. Request a written response you can compare with the account entries.
You can also ask it to identify how the disputed sum will be handled during the investigation. Request that it explain any proposed collection steps and consider pausing recovery of the disputed part. Do not represent your request as proof that every collection process has automatically stopped. Read subsequent notices and seek help promptly if enforcement or loss of supply is threatened.
7. Address affordability without abandoning the billing dispute
The accuracy of a charge and your ability to pay it are separate matters. Tell the supplier if the demand creates immediate hardship, while making clear which amount remains disputed. Continue addressing current, undisputed consumption and ask how payments should be allocated. Avoid silently cancelling all payments as a negotiating tactic.
Ofgem's support guidance describes requests for a payment plan, a review of current payments and debt repayments, and access to available hardship support. Explain your actual circumstances rather than offering a monthly figure you cannot sustain. Keep any proposal and the supplier's response with the complaint record.
If the supplier offers an arrangement covering the whole demand, clarify whether accepting it affects the unresolved complaint or is simply a temporary payment arrangement. Ask for the terms in writing. Where the consequences are unclear or a formal recovery notice arrives, obtain independent debt or legal advice based on the documents rather than relying on a general article.
8. Use the correct escalation route
Ofgem's complaints guidance directs billing complaints to the supplier first. Ofgem monitors compliance but does not decide individual consumer disputes. Keep proof of when the supplier received your complaint and the reference it assigned. Repeatedly opening fresh tickets can make the chronology harder to establish.
The Energy Ombudsman's back billing guidance identifies escalation after eight weeks without resolution or on receipt of a deadlock letter. Check the scheme's current eligibility and referral requirements before submitting. A deadlock letter and a routine acknowledgement are different documents; preserve the actual letter rather than relying on a telephone description of it.
For an escalation bundle, include the disputed bill, a manageable selection of earlier statements, relevant readings, your complaint and the final response. Explain the remaining disagreement and the correction sought. If the supplier has already removed part of the charge, update the amount so the reviewer does not investigate a balance that is no longer being demanded.
9. Check the correction when the supplier responds
A message saying “we have adjusted your account” is the beginning of the final check. Obtain the revised statement and compare the disputed periods, readings and payments. Confirm whether the adjustment is a credit, a cancellation of charges, a refund or a change to future instalments. These actions can have different effects on the amount still shown as payable.
Keep the original bill alongside the replacement so you can explain what changed. Where the supplier says it has refunded money, check the destination and the payment record. If a credit remains on the account instead, ask whether that matches the agreed outcome. Do not submit duplicate refund requests without telling the second recipient about money already returned.
An illustrative example shows why this matters: a replacement bill covers twenty months, but the supplier's response removes an old estimate and adds a new charge without showing the period split. The useful follow-up asks for the calculation and the treatment of the older months. It does not assume that twelve twentieths of the total is automatically payable, because usage, tariffs and earlier billing may differ.
Five common questions
Does a bill older than twelve months disappear automatically?
No. Distinguish newly recovered, previously unbilled charges from an accurate charge already properly raised. Ask for the earlier bill and the supplier's explanation of the relevant period. Age alone does not resolve every account dispute.
Can I challenge a back bill if I paid by Direct Debit?
Yes. Regular payments do not by themselves show that the supplier billed the correct amount. Compare the payments, previous statements and new calculation, including whether the instalments were set too low.
What if I did not send a meter reading?
That fact alone does not settle the protection question. Explain the circumstances honestly, preserve any requests or access arrangements and ask the supplier to identify the specific basis on which it considers an exception applies.
Should I send the complaint straight to Ofgem?
Raise the individual billing complaint with the supplier first. Ofgem's regulatory role is different from the Energy Ombudsman's dispute resolution role. Follow the appropriate escalation process and retain the original complaint date.
What should I do after receiving a reduced bill?
Check the periods, credits and payments rather than comparing totals alone. Confirm what remains disputed, whether any refund actually arrived and whether the written outcome matches the account. Preserve the old and new versions.
Final preparation checklist
- Save the complete revised bill and its issue date.
- Confirm the account, address, fuel and meter identity.
- Separate new charges, replacement bills and previously billed debt.
- Request readings, tariff periods and a clear calculation.
- Match bank payments to credits on the supplier's account.
- Record meter access and earlier contacts accurately.
- State the precise correction and explanation you want.
- Address immediate affordability and any urgent notices.
- Preserve the complaint date and check the escalation route.
- Verify the final statement and any promised refund.